The tunnel is up and I can ping and access the NVR from the 192.168.10.0 network but not from the client VPN. The tunnel has the following config. I was also told by support that no firewall rules needed to be configured but I couldnt ping across until I allowed all traffic through under WAN_IN on Site 1.
So although I can reach from 192.168.10.0, I can't seem to ping from 192.168.11.0 even though I have a static route to 192.168.2.0/24 directed to the USG1 WAN IP. What am I missing?
USG1 Remote subnets: 192.168.2.0/24 Remote host: Public IP of Site 2 Remote address: 169.254.255.2:501 Local address: 169.254.255.1:501 USG2 Remote subnets: 192.168.10.0/24, 192.168.11.0/24 Remote host: Public IP of Site 1 Remote address: 169.254.255.1:501 Local address: 169.254.255.2:501
No comments:
Post a Comment