Cisco OSPFv3 Carrying vrfs?

So I have a config I've put together for my new corporate network while segmenting with vrfs. I'm able to get default table routes no problem, but nothing carries over on my vrfs, all I get is local table. Am I misunderstanding the concept entirely or am I just missing some bit?

Going to post just the relevant VRF config and ospfv3 from both, don't believe I need anything besides that currently.

Sw1

vrf definition CAMERAS rd 6969:1503 ! address-family ipv4 route-target export 6969:1503 route-target import 6969:1500 route-target import 6969:1504 exit-address-family ! address-family ipv6 route-target export 6969:1503 route-target import 6969:1500 route-target import 6969:1504 exit-address-family ! ! interface Vlan150 description Cameras vrf forwarding CAMERAS ip address 10.x.x.x 255.255.255.128 ip verify unicast source reachable-via rx allow-default ipv6 enable ipv6 verify unicast source reachable-via rx allow-default ospfv3 6969 ipv4 area 123 no autostate ! router ospfv3 6969 router-id 10.x.x.72 log-adjacency-changes detail auto-cost reference-bandwidth 100000 timers throttle spf 50 50 5000 timers throttle lsa 0 20 5000 timers lsa arrival 15 timers pacing flood 15 ! address-family ipv4 unicast passive-interface default no passive-interface GigabitEthernet1/0/48 exit-address-family ! address-family ipv6 unicast passive-interface default no passive-interface GigabitEthernet1/0/48 exit-address-family ! address-family ipv4 unicast vrf CAMERAS redistribute connected passive-interface default capability vrf-lite exit-address-family 

Sw2

vrf definition CAMERAS rd 6969:1504 ! address-family ipv4 route-target export 6969:1504 route-target import 6969:1500 route-target import 6969:1503 exit-address-family ! address-family ipv6 route-target export 6969:1504 route-target import 6969:1500 route-target import 6969:1503 exit-address-family ! ! interface Vlan150 description Cameras vrf forwarding CAMERAS ip address 10.x.x.x 255.255.255.128 ip verify unicast source reachable-via rx allow-default ipv6 enable ipv6 verify unicast source reachable-via rx allow-default ospfv3 6969 ipv4 area 123 no autostate ! router ospfv3 6969 router-id 10.x.x.80 log-adjacency-changes detail auto-cost reference-bandwidth 100000 timers throttle spf 50 50 5000 timers throttle lsa 0 20 5000 timers lsa arrival 15 timers pacing flood 15 ! address-family ipv4 unicast passive-interface default no passive-interface GigabitEthernet1/0/48 exit-address-family ! address-family ipv6 unicast passive-interface default no passive-interface GigabitEthernet1/0/48 exit-address-family ! address-family ipv4 unicast vrf CAMERAS redistribute connected passive-interface default capability vrf-lite exit-address-family