When I have a remote client connected to my Juniper firewall VPN they lose Outlook / Internet access

Hi,

​

I have an remote VPN client service setup on a Juniper.

​

I trying to set up a split tunnel service on Window 10 machine so that:

​

Internet Traffic is sent outside VPN (for speed)

Certain Local IP is sent through the VPN tunnel

​

My question is : I've tried setting some static routes to force the traffic through the VPN tunnel. But no luck. is it possible routes to force the Internet / Outlook traffic outside VPN client without split-tunnel config on juniper ?

​

VPN defaut route like below on Windows 10 computer :

​

IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.136 25 0.0.0.0 0.0.0.0 172.16.10.0 192.168.1.136 280 0.0.0.0 0.0.0.0 on-link 10.186.100.10 1 (vpn ip address) 

​

​

Thanks,