Hello all.
I have successfully created an SDN network and connected to ONOS controller. Everything runs perfectly. Now I want to add a legacy router (they are provided with MiniEdit) but I can't seem to configure it correctly. The network is simple and can be found here it consists of two hosts and 3 SDN switches, a legacy router between two SDN switches and the controller.
I'd appreciate any help from any mininet/MiniEdit expert.
Info:
Host1 IP address is 10.0.0.11 Host2 IP address is 10.0.0.12
I don't usually assign IPs to the switches since ONOS takes care of identifying all openflow devices.
The terminal of the legacy router can load zebra, bgp and the configurations will be with the "configure terminal" command using >bgp >vtysh
No comments:
Post a Comment