HSRP on subinterface (Both router showing active)

Hello everyone,

https://i.imgur.com/B5mS0SP.png

I tried lot of troubleshooting and couldn't come up with solution. Both my routers are showing hsrp active for group 10.

All interface of both switches are in trunk(encapsulation is dot1q). EDGE-R1 cannot ping EDGE-R2 subinterface ip and vice-versa. But both routers can ping virtual hsrp ip. When debug on both routers i see both are sending hello packet but seems not receiving each other hellos which i suspect causing problem.

Am i missing something in configuration ? Any suggestions would be helpful .