I followed this post to play with stateless NAT64. I can ping the 192.1.1.1 (2001:DB9:0:1::C001:101) from R1 just fine. However, from R2 I can't seem to ping 2001:DB9:0:1::C0A8:502, which I think is the translated R1's 192.168.5.2 address. Is this correct? If yes, is there something missing in the config?
R1#ping 192.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.1.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 3/4/5 ms R3#ping ipv6 2001:DB9:0:1::C0A8:502 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 2001:DB9:0:1::C0A8:502, timeout is 2 seconds: AAAAA Success rate is 0 percent (0/5) 
No comments:
Post a Comment