So this is my issue. I have an ASA 5508-X that I have setup. Last week I had everything working and was able to get to the http://192.168.1.1/admin and install the ASDM console. Something happened between now and then so I reset my ASA back to factory defaults. I thought it was a license issue because i kept getting that the license was expired so I uploaded a new license and that is resolved. I am still having an issue trying to get to the ASDM console. I can ping my ASA which is set to GbE1/3 and is 192.168.1.1. When I try to ping 8.8.8.8 I get the No route to host message. I have the network cable going from my laptop to port 3. and it is up and running. Any Ideas?? Here's my config file... No I forgot to save my previous config before going back to factory settings...noob mistake.
ASA Version 9.12(2)4
!
hostname ciscoasa
enable password ***** pbkdf2
names
no mac-address auto
!
interface GigabitEthernet1/1
description FiOS
nameif outside
security-level 0
ip address 71.127.XXX.XXX 255.255.255.0
!
interface GigabitEthernet1/2
no nameif
security-level 100
no ip address
!
interface GigabitEthernet1/3
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
!
interface GigabitEthernet1/4
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/5
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/6
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/7
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/8
shutdown
no nameif
no security-level
no ip address
!
interface Management1/1
management-only
no nameif
no security-level
no ip address
!
boot system disk0:/asa9-12-2-4-lfbff-k8.SPA
ftp mode passive
object network obj_any
pager lines 24
logging asdm informational
mtu outside 1500
mtu inside 1500
no failover
no monitor-interface service-module
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-openjre-7122.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
arp rate-limit 16384
!
object network obj_any
nat (any,outside) dynamic interface
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 sctp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
timeout conn-holddown 0:00:15
timeout igp stale-route 0:01:10
user-identity default-domain LOCAL
aaa authentication login-history
http server enable
no snmp-server location
no snmp-server contact
service sw-reset-button
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh stricthostkeycheck
ssh timeout 5
ssh version 2
console timeout 0
management-access inside
dhcpd auto_config outside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
dynamic-access-policy-record DfltAccessPolicy
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
no tcp-inspection
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:b77caea5806ee5d186a1e08e7372a62b
: end
No comments:
Post a Comment