First time touching Cisco devices actually.
Got used Cisco Nexus 3064 for a week to try out with a plan to swap current core with it if everything's okay.
So I've setup whatever I needed, copied running config to startup config, everything looks good. After that I rebooted device - and it now asks me where to boot from.
show version shows this:
Software BIOS: version 4.1.0 NXOS: version 7.0(3)I6(2) BIOS compile time: 01/30/2017 NXOS image file is: bootflash:///nxos.7.0.3.I6.2.bin NXOS compile time: 10/17/2017 19:00:00 [10/18/2017 02:48:10] Hardware cisco Nexus3000 C3064PQ Chassis Intel® Celeron® CPU P4505 @ 1.87GHz with 3903096 kB of memory. Processor Board ID FOC183885VR Device name: core-11 bootflash: 1880320 kB usb1: 0 kB (expansion flash) Kernel uptime is 0 day(s), 0 hour(s), 37 minute(s), 19 second(s) Last reset Reason: Unknown System version: Service: plugin Core Plugin, Ethernet Plugin Active Package(s):
If I manually boot from that nxos.7.0.3.I6.2.bin file - it boots okay. However it doesn't automatically boot from it, as I expect it should. Also my eye kinda stumbles on this tripple slash in
NXOS image file is: bootflash:///nxos.7.0.3.I6.2.bin
How do I proceed?
No comments:
Post a Comment