I'm trying to get VLANs to work properly on the following equipment: WatchGuard T15 Firewall and Netgear Prosafe Manage switch (GS108PE)
VLANs are working correctly on the WatchGuard. I can plug directly into the Interface and program to any VLAN I want. The issue is trying to assign VLANs to the switch ports.
I believe the issue is with the Trunk. I am using port 8 for the Trunk.
VLAN Memberships:
| VLAN ID | Port Members |
|---|---|
| 1 | 7, 8 (Port 7 is unused) |
| 4001 | 1, 8 |
| 4002 | 2, 8 |
| 4003 | 3, 8 |
| 4004 | 4, 8 |
| 4005 | 5, 8 |
| 4006 | 4, 8 |
VLAN port is Untagged, Trunk is Tagged.
Firmware: V2.06.03EN
Also, when programming the PVIDs for the ports, I can only select 1 PVID per port. So I have Port 8 set to PVID 1 (Tried 4001 to no avail).
Is there something blatantly obvious that I am missing here? I spent a solid 3/4 of my work day yesterday trying to get this to work. Does my uplink/trunk need to be a part of every VLAN membership? Any help would be greatly appreciated!
No comments:
Post a Comment