Hey i'm digging into Infiniband 10/20 and 40GBit/s or SDR/DDR and QDR. Currently i have two problems to solve to get everything working.
Problem 1: Speed negotiation issues with windows
Details:
- A goold old HP ML150 M5 with Mellanox ConnectX-2 MHQH29-XTC and Server 2008 R2 running.
- It shows physical link, but diagnostics says there are issues with speed negotiation (speed test failed, link test passed).
- Port LED on switch flashes green.
- I tried to do a firmware update but i cant find any matching ids for an update.
- Device Manager lists Controller as MT26428.
- The drivers used for installation are VPI_WinOF Version 5.35.
Problem 2: Connect IB-Switch with GBE-Switch
Details:
- To be more precise we want to connect a Mellanox IS5022 with a HP ProCurve 2810-48G directly or with an adapter/converter
- Protocol used is IPoverIB.
- As far as i know we need to convert from QSFP+ QDR (or SDR/DDR) to a usual 1 GB Ethernet.
- We already tried to connect these switches by ourself with no success:
- IS5022 -> HP QSFP-SFP Adapter 655874-B21 -> GBIC HP SX-LC J4858C -> SX Multimode 850nm LC Cable -> HP GBIC HP SX-LC J4858C -> ProCurve 2810.
- GBIC's and fibre cable are functional, I tried it with another GBE switch and they are fine.
- Distributor said that our QSFP to SFP Adapter will work because they sell/use them quite often together with a IS5022.
- Current error i would describe as: physical link led is off.
Additional Details
- Infiniband is already working between some hosts. 2x HP DL360 Gen9 with ESXi 6.5 and Mellanox Connect-X 2 NICs connected to a Mellanox IS-5022 Switch.
- I wanna use IB for usual IP/network communication between hosts and clients.
- IS-5022 is a unmanaged switch for 40GBit/s / QDR IB
- tried several drivers on windows machine- no success
- controller port configuration changed to auto / ib or eth - no success
- tried everything with both ports on nic and different ports on switch - no difference
Any ideas or advices?
No comments:
Post a Comment