Redundant trunked up-link ports between two switches.

Hi,

I have a redundant up-link port between two switches. The ports are trunked.

- Port 48 copper link

-Port 47 - Wireless bridge

I am trying to have it so if the copper link goes down the wireless bridge would kick in.

​

The question is:

- Is spanning tree the only way to have redundant links properly fail-over?

- If so, how can I manually choose which port is primary/secondary?

- The switches I am using are Ruckus.

​

​

I have spanning tree enabled. Below is the spanning tree details of both links currently plugged in.

​

Port 1/1/47 is FORWARDING

Port - Path cost: 4, Priority: 128, Root: 0x8000609c9ffdf1dc

Designated - Bridge: 0x8000609c9ffdf1dc, Interface: 46, Path cost: 0

Active Timers - Hold: 0

BPDUs - Sent: 473, Received: 2

​

Port 1/1/48 is FORWARDING

Port - Path cost: 4, Priority: 128, Root: 0x8000609c9ffdf1dc

Designated - Bridge: 0x8000609c9ffdf1dc, Interface: 47, Path cost: 0

Active Timers - Hold: 0

BPDUs - Sent: 932, Received: 2

​

​

​