VPC

I'm confused.

​

Device A (Switch Stack) has a port channel 1 set up with two ports, tengig 1/1/4 and tengig 2/1/4.

These are both supposed to go to separate devices that are using VPC.

They have peering links between them. We'll call those device B & C.

​

​

So

Device A Te1/1/4 --> Device B Eth 1/1

Device A Te2/1/4 --> Device C Eth 1/1

​

Device A Te1/1/4 and 2/1/4 are a port-channel setup.

​

Devices B & C are using Peer links.

Device B has ethernet 1/10 and ethernet 1/11 as links to Device C on C's Eth 1/10 and 1/11.

​

The $64,000 question here... is whether or not I need to set up anything ELSE on devices B & C, or if the peer-links are already doing the port-channel end on that side?

​

#FeelingStupid