before i start looking for an IOS upgrade just wanted to check here.
I have a Nexus9000 C9372TX and a Nexus9000 C93108TC-EX (C9372TX ios nxos.7.0.3.I2.2a.bin & C93108TC ios nxos.7.0.3.I4.3.bin)
in port 53 on both a QSFP-40G-SR-BD
Ethernet1/53 transceiver is present type is QSFP-40G-SR-BD name is CISCO-AVAGO part number is AFBR-79EBPZ-CS2 revision is 01 serial number is AVFx nominal bitrate is 20600 MBit/sec per channel Link length supported for 50/125um OM3 fiber is 100 m cisco id is 13 cisco extended id number is 220 -------------- Ethernet1/53 transceiver is present type is QSFP-40G-SR-BD name is CISCO-AVAGO part number is AFBR-79EBPZ-CS2 revision is 01 serial number is AVFx nominal bitrate is 20600 MBit/sec per channel Link length supported for 50/125um OM3 fiber is 100 m cisco id is 13 cisco extended id number is 220
on the c9372tx i get no lights in the transceiver
on my C93108TC the transceiver is lit.
c9372tx
Eth1/53 1 eth access down check speed-group config auto(D) --
C93108TC
Eth1/53 1 eth access down Link not connected auto(D) --
tried removing the speed group but i get
C9372TX-10G-01(config-if)# no speed-group 10000 ERROR: Ethernet1/53: Configuration does not match the port capability.
any help thanks!
No comments:
Post a Comment