Meraki Wireless vlan tagging and communication issues

Hello Everyone,

I am trying to setup a wireless network that is tagged as vlan 50 and make it so that devices on that wireless network can communicate with devices on vlan 1

Here is some background information about my setup

MX64 firewall --> MS320-48FP --> MR18 Access Point

vlan 1 CIDR 10.11.100.0/24 MX IP 10.11.100.1

vlan 50 CIDR 10.50.100.0/24 MX IP 10.50.100.1

All ports on the firewall and switch are set to trunk with a native vlan of 1 Aside from this I have done nothing with the switch

When a device joins the wireless network tagged with vlan 50 it gets an ip address from the right pool and it has internet access, however whenever i try to ping anything on vlan 1 or even the MX IP on vlan 50 I get this response;

"Reply from 10.128.128.128: Destination net unreachable"

I have no idea where this 10.128.128.128 is coming from as it doesnt exist in any of my configurations

I suspect i'm missing something in configuring the switch, however i'm not really all that sure about what i'm doing to begin with.

Any advice would be appreicated.

Thank you.

EDIT: /u/nappy1515 Had my answer, i completely forgot that the wireless section had its own firewall & traffic shaping section