Hi,
I have an issue that i can't figure out and solve about scanners. At my workplace we have Utax 256i scanners on a different vlan (vlan 50: 10.37.35.x) configured with proper static ip, subnet mask, default gateway and smb & ftp ports are permitted by the firewall. The clients are on another vlan (vlan 10: 10.37.16.x) and taking IP from DHCP server.
Before Vlan structure every single pc were able to scan and send files from utax machines to the dedicated folders on pc via FTP port or SMB port but system didn't worked after applying Vlans.
My network is controlled by main branch and Vlan structure has been applied by them on Cisco switches. I only configured the scanners' static ip, subnet mask and default gateway parameters as they said and gave. Scanning didn't work. System worked only if the machine is configured in same vlan with clients.
I asked main branch network department to look to the FireWall logs in case it rejects or close the ports for SMB or FTP but they said it is ok. I tried everything (change the static IP, change the SW port etc) but nothing working.
Is there any solution you could offer me to solve this?
Thanks in advance and sorry for my English.
No comments:
Post a Comment