Hello all, I am having trouble creating a VLAN on a Netgear Prosafe XS712T switch.
What I am trying to do:
- Create a VLAN with IP subnet of 192.168.1.xxx on the switch for 4 ports.
- Connect my laptop, odroid(linux machine) & a android media player to those 4 ports
- Assign those 4 devices an IP address via DHCP? or Static?
- Create an RTSP stream on the linux machine and decode it using the android media player.
The reason I want to do this on a separate switch is because I am afraid of bogging down our office network and would rather have an isolated network for my testing purposes.
What I have tried doing so far:
Please also have a look at this imgur album of screenshots of the switch settings I have tried configuring so far from the web GUI - https://imgur.com/a/HqflC
- Created a VLAN #20 and called it Test
- Set the first 4 ports as untagged
- Configured the PVID to 20 for the 4 ports
- Tried setting up a DHCP server for that VLAN
- Set the IP address of the VLAN to 192.168.1.1 in the Routing tab.
im probably not doing this right, I have very basic knowledge when it comes to setting up a network switch as you can probably tell. I was using these links below from Netgear as a guide, any help/suggestions or feedback is appreciated! thanks in advance!
https://kb.netgear.com/29997/How-to-create-Layer-2-VLANs-on-NETGEAR-ProSAFE-Switches
https://kb.netgear.com/24755/How-do-I-configure-VLAN-Routing-on-a-smart-switch
No comments:
Post a Comment