So in summary we just got 2 new 5624Q to use as core switches and I'm trying to setup vPC to a 56128 TOR switch. It looks like the 2 core switches see the port-channel up if I'm reading it correctly but the TOR switch isn't seeing the same (SD)
Any help would be much appreciated!
Here are the outputs for the 3 switches:
CORE SWITCH 1
SES-CORE-SW-01(config-if)# sh vpc brief Legend: (*) - local vPC is down, forwarding via vPC peer-link
vPC domain id : 1000 Peer status : peer adjacency formed ok vPC keep-alive status : peer is alive Configuration consistency status : success Per-vlan consistency status : success Type-2 consistency status : success vPC role : primary, operational secondary Number of vPCs configured : 1 Peer Gateway : Disabled Dual-active excluded VLANs : - Graceful Consistency Check : Enabled Auto-recovery status : Enabled (timeout = 240 seconds) vPC Peer-link status
id Port Status Active vlans
1 Po1 up 1 vPC status
id Port Status Consistency Reason Active vlans
1000 Po21 up success success 1
SES-CORE-SW-01(config-if)# sh port-channel summary Flags: D - Down P - Up in port-channel (members) I - Individual H - Hot-standby (LACP only) s - Suspended r - Module-removed S - Switched R - Routed U - Up (port-channel) M - Not in use. Min-links not met
Group Port- Type Protocol Member Ports Channel
1 Po1(SU) Eth LACP Eth2/11(P) Eth2/12(P) 21 Po21(SU) Eth NONE Eth2/1(P)
CORE SWITCH 2
SES-CORE-SW-02(config-if)# sh vpc brief Legend: (*) - local vPC is down, forwarding via vPC peer-link
vPC domain id : 1000 Peer status : peer adjacency formed ok vPC keep-alive status : peer is alive Configuration consistency status : success Per-vlan consistency status : success Type-2 consistency status : success vPC role : secondary, operational primary Number of vPCs configured : 1 Peer Gateway : Disabled Dual-active excluded VLANs : - Graceful Consistency Check : Enabled Auto-recovery status : Enabled (timeout = 240 seconds) vPC Peer-link status
id Port Status Active vlans
1 Po1 up 1 vPC status
id Port Status Consistency Reason Active vlans
1000 Po21 up success success 1
SES-CORE-SW-02(config-if)# sh port-channel summary Flags: D - Down P - Up in port-channel (members) I - Individual H - Hot-standby (LACP only) s - Suspended r - Module-removed S - Switched R - Routed U - Up (port-channel) M - Not in use. Min-links not met
Group Port- Type Protocol Member Ports Channel
1 Po1(SU) Eth LACP Eth2/11(P) Eth2/12(P) 21 Po21(SU) Eth NONE Eth2/1(P)
TOR SWITCH
SES-TOR-SW-F10(config-if)# sh port-channel summary Flags: D - Down P - Up in port-channel (members) I - Individual H - Hot-standby (LACP only) s - Suspended r - Module-removed S - Switched R - Routed U - Up (port-channel) M - Not in use. Min-links not met
Group Port- Type Protocol Member Ports Channel
10 Po10(SD) Eth NONE -- 21 Po21(SD) Eth LACP Eth1/49(I) Eth1/50(I)
No comments:
Post a Comment