Setting up Ruckus Zone Director and APs on Juniper 3400s

Hello, I am very new to Ruckus and fairly new to networking in general but have had plenty of experience at this point in Juniper switching. Long of it short, I have installed several new Juniper switches for a company and also am setting up a Ruckus ZoneDirector locally on the network. They'll have a VLAN 10 for the default network and VLAN 20 for the WiFi, my question is on the Juniper and Ruckus how do they have to be setup for them to all work correctly? I have tried setting the controllers and APs on access ports for the WiFi, however with a DHCP relay to the windows server the APs are not getting IPs or talking to the controller. I then changed the IP of the controller to be on the default network and changed the APs to also be on access ports for the default network and they then could communicated but now the wireless does not work as it is tagged in the controller for VLAN 20.

Tl;dr What would be the right way to set up a controller, AP, and switch to all work locally and have the wireless users on a separate network.