Tuesday, December 19, 2017

ASR1002-F Question

Greetings all, Sorry for my english. Is there any ASR1002-F users out there? I'm currently having some issues with the one of a router. When i plugged in 4 SFP (GLC-SX-MM) the SPA port LED does not show that the SFP is enabled. And i'm sure that the SPF is working as it is taken from another working unit (ASR1002-F)

When i issue a command "show facility-alarm status" below shows this, when i plugged in a fiber cable no LED and such and i issues the same command the below description still remains.

Source Severity Description [Index]


  • GigabitEthernet0/0/0 INFO Physical Port Administrative State Down [2]
  • GigabitEthernet0/0/1 INFO Physical Port Administrative State Down [2]
  • GigabitEthernet0/0/2 INFO Physical Port Administrative State Down [2]
  • GigabitEthernet0/0/3 INFO Physical Port Administrative State Down [2]

When i took it out

ource Severity Description [Index]


  • xcvr container 0/0/0 INFO Transceiver Missing [0]
  • xcvr container 0/0/1 INFO Transceiver Missing [0]
  • xcvr container 0/0/2 INFO Transceiver Missing [0]
  • xcvr container 0/0/3 INFO Transceiver Missing [0]

Is there a way to enable the SPA port or a command maybe?



No comments:

Post a Comment