Hi everybody;
I have the following scenario (IP's are fake, is only orientative example), i am implementing a new mobility express topology because in our company everybody is still using ethernet cable :S, the following topology is that:
Laptop ------ WLC -------- Switch 1 ------- CORE
Ip Address DHCP Pool Int Vlan 44 int vlan 3
192.168.45.231 192.168.44.0 192.168.44.2 192.168.3.1/24
255.255.254.0 255.255.254.0 255.255.254.0
GW GW Int vlan 3
192.168.44.2 192.168.44.2 192.168.3.4/24
Vlan 44 Vlan 44 default router to:
Management vlan 10 192.168.3.1
192.168.10.90/24
Default GW for vlan 10 Management vlan 10
192.168.10.22/24 192.168.10.22/24
From the test laptop i am able to ping his GW 192.168.44.2 and the IP 192.168.3.4 but i am not be able to ping the CORE Ip address 192.168.3.1.
From the Switch 1, obviously i can ping the IP 192.168.3.1 from the Core, and even i can ping 192.168.3.1 source 192.168.44.2
On Switch1 the use default ip route to the ip address 192.168.3.1 (interface vlan 3 of Core)
On Core i use this static route:
ip route 192.168.44.0 255.255.254.0 192.168.3.4
What's wrong? I forgot something? I only use in this case static routes.
No comments:
Post a Comment