I am trying to setyp a home lab with a cisco nexus c5020p and 2 c2248tp fabric extenders.
I have to port modes to fabric and every port is in vlan1 but i am getting the following
FEX FEX FEX FEX
Number Description State Model Serial
101 FEX0101 Online N2K-C2248TP-1GE Sshhhhhhhh 102 FEX0102 Online N2K-C2248TP-1GE Supersecret
VLAN Name Status Ports
1 default active Eth1/3, Eth1/4, Eth1/5, Eth1/6 Eth1/7, Eth1/8, Eth1/10, Eth1/11 Eth1/12, Eth1/13, Eth1/14 Eth1/15, Eth1/16, Eth1/17 Eth1/18, Eth1/19, Eth1/20 Eth1/21, Eth1/22, Eth1/23 Eth1/24, Eth1/25, Eth1/26 Eth1/27, Eth1/28, Eth1/29 Eth1/30, Eth1/31, Eth1/32 Eth1/33, Eth1/34, Eth1/35 Eth1/36, Eth1/37, Eth1/38 Eth1/39, Eth1/40, Eth101/1/1 Eth101/1/2, Eth101/1/3 Eth101/1/4, Eth101/1/5 Eth101/1/6, Eth101/1/7 Eth101/1/8, Eth101/1/9 Eth101/1/10, Eth101/1/11 Eth101/1/12, Eth101/1/13 Eth101/1/14, Eth101/1/15 Eth101/1/16, Eth101/1/17
Abreveated
Vlan1 is down, line protocol is down Hardware is EtherSVI, address is 0005.73de.85fc Internet Address is 172.16.0.239/24 MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec
The switch ia not switching any traffic.
The copper ports on the fabric extenders do not link up.
What am i missing?
Thanks in advance!
No comments:
Post a Comment