Cisco ASR BVI Question?

Hi,

Anyone tried setting up an BVI under physical which converted as l2transport? Just want to have a quick check if anyone experienced or this setup is possible.

​

Simple topology(1.1.1.1)CE------->PE1---l2vpn----PE2

​

PE1:

interface GigabitEthernet1

desc facing CE

load-interval 30

l2transport

​

interface BVI10

ipv4 address 1.1.1.2 255.255.255.0

​

l2vpn

bridge group VLAN10

bridge-domain VLAN10

interface GigabitEthernet1

routed interface bvi4

Since I want to test the reachability between PE1 and CE router without breaking the l2vpn-PW, I'm thinking to configure a BVI if possible, But ex. if I add the routed BVI on a bridge group/bridge-domain does it affects or create an interruption on the pseudowire(l2vpn) circuit configured between PE1 to PE2?

​

Or this setup is not possible? Still checking the docs given by cisco.

​

Thanks