This is the network topology for reference: image
I'm having an issue with this lab assignment I have been given. What I have successfully have done is:
- Configure MS0 as a dhcp pool for all the devices
- All devices connected to MS0 are able to get addresses
- Configure all the host ports to their appropriate vlan segments
- Gig0/1 of both MS0 and MS1 are configured as trunk ports
What I am not able to accomplish that is required:
-
The devices on MS1 are supposed to get an address from MS0 but am unable to figure out how to configure ip helper in this scenario. Gig0/1 is not supposed to have an address and therefore don't have a clue how the dhcp packets are supposed to be forwarded to MS0.
-
The devices in MS0 are not able to ping the devices in MS1. In the lab instructions we are not supposed to put any routing protocols between them. There was no further instruction on how to get the pings across with no routing protocol
All PC's are supposed to be able to ping eachother and to the internet.
Any help with how to configure the problems above would be greatly appreciated.
Thanks!
No comments:
Post a Comment