Connecting Ruckus switch into Cisco switch with trunk

hello, im a newbie in network, i was browsing all over the internet but im stuck in here (maybe i dont know the concept), i cant connect 2 different device with trunk mode.

btw i have 4 active vlan : 81,88,90,91. vlan 21 is for the trunk experiment.

this is the ruckus setting :

vlan 1 name DEFAULT-VLAN by port

spanning-tree

!

vlan 21 name "connect test" by port

tagged ethe 1/1/22

spanning-tree

!

vlan 81 name Management by port

untagged ethe 1/1/18 to 1/1/19

spanning-tree

!

vlan 88 name Local by port

untagged ethe 1/1/1 to 1/1/17

spanning-tree

!

vlan 90 name Voice by port

tagged ethe 1/1/1 ethe 1/1/6 ethe 1/1/9 to 1/1/17

spanning-tree

!

vlan 91 name DMZ by port

untagged ethe 1/1/20 to 1/1/21

spanning-tree

!

end

and this is the cisco setting :

interface FastEthernet0/23

description "LINK_MANRO_0/0/3"

switchport mode trunk

In ruckus port 22 which will be connected to cisco port 23

How to connect a cisco switch to ruckus switch with trunk mode ? As i know that cisco uses command "switchport mode trunk" to trunking with other cisco device, and ruckus using "tagged" because the dual mode was depreciated.

thankyou for helping me.